GE CyberDome II, User Manual, Page: 47 / 60

Chapter 1
Programming
39
Figure 52. Password protection
2. Select 3 . The Change password menu displays ( Figure 53 ).
Figure 53. Change password menu
3. Using the number selecting line, enter four numbers for your password.
4. Enter those same numbers again when prompted.
5. Password saved is displayed onscreen, and the menu exits back to the Password protection menu
( Figure 52 ).
To enable passwords, do the following:
1. From the Program select menu 2 screen (Figure 48 on page 37), select 2 . The Password protection
menu displays.
2. Select 2 .
You have now enabled passwords, which means when you log onto the camera with a controlling device,
you’ll need to enter that password to access any programming.
To disable passwords, do the following:
1. From the Program Select Menu 2 screen, select 2 . The Password protection menu displays.
2. Select 1 .