GE B90 UR Series, Instruction Manual

Page: 262 / 478

6-4 B90 Low Impedance Bus Differential System GE Multilin
6.2 STATUS 6 ACTUAL VALUES
6
6.2.4 REMOTE DOUBLE-POINT STATUS INPUTS
PATH: ACTUAL VALUES

STATUS

REMOTE DPS INPUTS
The present state of the remote double-point status inputs is shown here. The actual values indicate if the remote double-
point status inputs are in the on (close), off (open), intermediate, or bad state.
6.2.5 CONTACT OUTPUTS
PATH: ACTUAL VALUES

STATUS

CONTACT OUTPUTS
The present state of the contact outputs is shown here. The first line of a message display indicates the ID of the contact
output. For example, ‘Cont Op 1’ refers to the contact output in terms of the default name-array index. The second line of
the display indicates the logic state of the contact output.
For form-A contact outputs, the state of the voltage and current detectors is displayed as Off, VOff, IOff, On, IOn,
and VOn. For form-C contact outputs, the state is displayed as Off or On.
6.2.6 VIRTUAL OUTPUTS
PATH: ACTUAL VALUES

STATUS

VIRTUAL OUTPUTS
The present state of up to 96 virtual outputs is shown here. The first line of a message display indicates the ID of the virtual
output. For example, ‘Virt Op 1’ refers to the virtual output in terms of the default name-array index. The second line of the
display indicates the logic state of the virtual output, as calculated by the FlexLogic™ equation for that output.

REMOTE DPS INPUTS

REMOTE DPS INPUT 1
STATUS: Bad
Range: On, Off, Intermediate, Bad
MESSAGE
REMOTE DPS INPUT 2
STATUS: Bad
Range: On, Off, Intermediate, Bad

MESSAGE
REMOTE DPS INPUT 5
STATUS: Bad
Range: On, Off, Intermediate, Bad

CONTACT OUTPUTS

Cont Op 1
Off
Range: On, Off, VOff, VOn, IOn, IOff
MESSAGE
Cont Op 2
Off
Range: On, Off, VOff, VOn, IOn, IOff

MESSAGE
Cont Op xx
Off
Range: On, Off, VOff, VOn, IOn, IOff

VIRTUAL OUTPUTS

Virt Op 1
Off
Range: On, Off
MESSAGE
Virt Op 2
Off
Range: On, Off

MESSAGE
Virt Op 96
Off
Range: On, Off
NOTE