GE ArcamEBM Spectra H, Operation Manual

Page: 74 / 142

7
Software
Overview
7 7..1 1..2 2 P Prro od du uccttiio on n M Mo od de e
Production Mode gives limited access to machine controls. It also gives a more
slimline and easy-to-use interface for the operator. Its layout will guide the operator
throughout the procedure of preparing the machine for a build.
This mode is especially for the Operators and Production Operators, but the Admin-
istrator and Engineer can also access this mode.
Its layout will guide the operator throughout the proce-
dure of preparing the machine for a build.
The production mode interface is divided into two
sections:
• A fixed panel at the top
• An overview window, that changes appearance de-
pending on which button is pressed.
A timer symbol in the upper left corner of a
button means that the button needs to be
kept pressed for approximately two seconds
to be activated. A timer progress bar ap-
pears above the button.
N No otte e
Depending on the Production Mode Settings (Machine Setup in Engineering Mode), the operator
is given access to different functions.
70 02 OM-710430 en-GB