GE ArcamEBM Spectra H, Operation Manual

Page: 134 / 142

7
Software
Overview
7 7..1 1..3 3..1 10 0 M Ma an nu ua all C Co on nttrro ollss
The Manual Controls page will allow the operator to manually control
the build process, for example perform a layer test run.
S Stta arrtt
Enters manual mode and starts to analyse.
S Stto op p
Stops manual mode and aborts any current melting. Rake and table
movement will proceed until they are done.
M Me elltt S Sa am me e L La ayye err
Melts the current layer.
M Me elltt N Ne exxtt L La ayye err
Increases the Z-height with one layer and melts the new layer.
M Mo ovve e T Ta ab blle e a an nd d R Ra akke e
Lowers the table by the thickness of the next layer and rakes powder
according to the rake method selected.
M Mo ovve e R Ra akke e
Rakes powder according to the rake method selected.
C Cu urrrre en ntt H He eiig gh htt
Displays the current build height.
130 02 OM-710430 en-GB