GE ArcamEBM Spectra H, Operation Manual

Page: 123 / 142

7
Software
Overview
T Ta ab blle e
Switch ON/OFF and reset the table.
Also activates the build tank lock and the build table lock.
T Ta ab blle e P Po ossiittiio on n
Shows the current position of the table (z-axis movement) relative to the last
time the S
Se ett O Offffsse ett button, located under the table position numerical value,
was pressed.
S Stte ep p S Siizze e
Shows the distance the table will move in the Z direction with each press of
the S
Stte ep p U Up p or S Stte ep p D Do ow wn n buttons.
The step size can be increased and decreased with the plus and minus but-
tons or typed in by pressing the numeric key button.
S Stta arrtt C Co om mp prre esssse ed d A Aiirr
Enables compressed air in machine when the chamber door is open. The
compressed air will cease to function when the light curtain is interrupted.
When all doors in the machine are closed, the compressed air will automati-
cally be activated.
S Stte ep p u up p // d do ow wn n
Moves the table in increments of the step size indicated in the Step size infor-
mation box.
On upwards movements the table will go up one additional millimeter and
then back down to compensate for backlash in the movement system.
JJo og g u up p // d do ow wn n
The table will move slowly while the button is pressed.
Z Ze erro oiin ng g
Sets the present Table Position value to zero.
C Cu urrrre en ntt p po ossiittiio on n
Indicates the current position of the rake arm.
F Fe ettcch h L Le efftt
Quickly moves the rake to the far left (fetching powder) and back to the left
side rest position.
02 OM-710430 en-GB 119