Using dual pump flow in a
method
Follow the steps below to use dual pump flow in a UNICORN method. These steps must
be performed for each phase that uses dual pump flow.
Action
Step
Open the Text Instructions tab for the phase.
1
Select the System flow instruction.
2
In the Instruction Box pane of the Text Instructions tab, select Pumps:Dual
pump flow.
3
Enter your parameters. Verify in the graph shown in
that the combination of %B and flow is compatible, and click
Change.
Tip:
When Pumps:Dual pump flow is selected, press the F1 key to access informa-
tion about the parameters.
4
ÄKTA pilot 600 User Manual 29274559 AA
83
4 Operation
4.4 Dual pump flow
Summary of Contents for AKTA pilot 600
Page 1: ...KTA pilot 600 User Manual...
