The small digits to the left are the selected
parameter number
.
Illustration 3.4: Indicating selected par. no.
The large digits in the middle of the display show the
value
of the selected
parameter.
Illustration 3.5: Indicating value of selected par.
The right side of the display shows the
unit
of the selected parameter. This
can be either Hz, A, V, kW, HP, %, s or RPM.
Illustration 3.6: Indicating unit of selected par.
Motor direction
is shown to the bottom left of the display - indicated by a
small arrow pointing either clockwise or counterclockwise.
Illustration 3.7: Indicating motor direction
Use the [MENU] key to select one of the following menus:
Status Menu:
The Status Menu is either in
Readout Mode
or
Hand Mode
. In
Readout Mode
the value of the currently selected readout parameter is shown in the display.
In
Hand Mode
the local Keypad reference is displayed.
Quick Menu:
Displays Quick Menu parameters and their settings. Parameters in the Quick Menu can be accessed and edited from here. Most applications can be run by setting
the parameters in the Quick Menus.
Main Menu:
Displays Main Menu parameters and their settings. All parameters can be accessed and edited here. A parameter overview is found later in this manual.
Indicator lights:
•
Green LED: The frequency converter is on.
•
Yellow LED: Indicates a warning. Please see section
Troubleshooting
•
Flashing red LED: Indicates an alarm. Please see section
Troubleshooting
AF-60 LP™ Micro Drive Programming Guide
8
3
