Chapter 4: Web-Based Management
58
GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual
OBJECT DESCRIPTION
Rate Control
(Unit: 128KBbps)
Port-1 - Port-24, supports by-port ingress and egress rate control.
For example, assume port 1 is 10Mbps, users can set its effective egress
rate at 1Mbps and ingress rate at 500Kbps. Device will perform flow
control or backpressure to confine the ingress rate to meet the
specified rate.
•
Ingress: Type the port effective ingress rate.
The valid range is 0 - 8000. The unit is 128K.
0: disable rate control.
1 - 8000: valid rate value
•
Egress: Type the port effective egress rate.
The valid range is 0 - 8000. The unit is 128K.
0: disable rate control.
1 -8000: valid rate value.
Security
A port in security mode will be "locked" without permission of address
learning. Only the incoming packets with SMAC already existing in the
address table can be forwarded normally.
User can disable the port from learning any new MAC addresses, then
use the static MAC addresses screen to define a list of MAC addresses
that can use the secure port. Enter the settings, then click Apply button
to change on this page.
BSF
User can disable/Enable port broadcast storm filtering option by port.
The filter mode and filter packets type can be select in Switch Setting >
Misc Config page.
Jumbo Frame
User can disable/Enable port jumbo frame option by port. When port
jumbo frame is enable, the port forward jumbo frame packet.
Summary of Contents for 82-POE
Page 26: ...Chapter 2 Installation 22 GE DS 82 and 82 PoE Ethernet Managed Switch User Manual ...
Page 148: ...Chapter 5 Console Management 144 GE DS 82 and 82 PoE Ethernet Managed Switch User Manual ...
Page 212: ...Chapter 6 Command Line Interface 208 GE DS 82 and 82 PoE Ethernet Managed Switch User Manual ...
Page 226: ......
