GE Security Legend IP, User Manual

Page: 56 / 140

Legend IP
User Manual
48
Privacy Masks page
Privacy masks let you conceal sensitive areas (such as neighboring windows) to protect them from view on the
monitor screen and in the recorded video. You can create 24 privacy masks (numbered 1 to 24) per dome. A
maximum of eight privacy masks can be displayed at one time.
When creating your masks, it is a common practice to make them 50% larger than the areas you wish to cover
so that the masked areas remain concealed at all times. Also, be aware that masks cannot be created in the area
directly below the dome. See
Figure 37 .
To access the Privacy Masks page, select Camera and Privacy Masks .
Figure 38. Privacy masks page
Note: Remember to select OK to save any changes you make on the page.
Mask number. The Mask number drop-down box allows you to select the mask number that you want to
program.
Figure 37. Masks should be 50% larger than the areas to be covered and are not allowed directly below the dome
Area to be masked
Mask
Mask 50% larger than area to be covered
No masks allowed 20° either side of 90° ( 0° ) tilt
Negative ( - )
hemisphere
Positive (+)
hemisphere
180°
( -90° )
0°
( +90° )
90°
( 0° )