GE Security Legend IP, User Manual

Page: 108 / 140

Legend IP
User Manual
100
To set the pan and tilt limits, see Page2 tab on page 54.
Table 10. Tilt limit constraints with E-flip enabled (arrow shows resulting tilt range)
Tilt limits set How the limits are used Illustration
Either the top or bottom limit is
set, but not both. The one limit becomes the top limit for
both hemispheres.
Both the top and bottom limits
are set, but one in the positive
hemisphere and one in the
negative hemisphere. Only the top limit is used, and it is used
for both hemispheres.
Both the top and bottom limits
are set, but the top limit is set
lower on the horizon than the
bottom limit is. Both limits are used, but they are
reversed.
Both the top and bottom limits
are set in the same
hemisphere. Both limits are used as set.
90°
(0°)
0°
(+90°)
180°
(-90°)
Positive (+) hemisphere Negative (-) hemisphere
Top set
(used)
Duplicate
(used)
Top set
(used)
Duplicate
(used)
Positive (+) hemisphere Negative (-) hemisphere
90°
(0°)
0°
(+90°)
180°
(-90°)
Positive (+) hemisphere Negative (-) hemisphere
Top set (used) Duplicate (used)
Bottom set (ignored)
Top set (used)
Duplicate of top
(used)
Bottom set
(ignored)
Negative (-) hemisphere Positive (+) hemisphere
90°
(0°)
0°
(+90°)
180°
(-90°)
Positive (+) hemisphere Negative (-) hemisphere
Bottom set
(used as top)
Top set
(used as bottom)
Negative (-) hemisphere Positive (+) hemisphere
Bottom set
(used as top)
Top set
(used as bottom)
90°
(0°)
0°
(+90°)
180°
(-90°)
Positive (+) hemisphere Negative (-) hemisphere
Top set
(used)
Bottom set
(used)
Negative (-) hemisphere Positive (+) hemisphere
Top set
(used)
Bottom set
(used)