GE Security Legend IP, User Manual

Page: 32 / 140

Legend IP
User Manual
24
Keypad shortcuts
The following are keypad shortcut commands carried over from CyberDome programming. Where keypad
shortcuts exist for a feature, such as setting presets, you can use keys from the keypad, instead of menus from
the programming interface, to program the feature. See
Table 2 . You can then go into the programming
interface and customize the programmed feature with titles and other attributes.
a
For details, see the KTD-405 Controller Keypad User Manual (1036547).
See Autopan limitations on page 99 for restrictions for setting autopan limits.
Table 2. Keypad shortcuts
Command Keypad shortcut
a
Set a preset store | (number) | store
Note: Storing presets with the KTD-400 or KTD-404 must be done using the Legend IP
analog interface.
Set the left autopan limit
store | | store
Note: On the KTD-400 or KTD-404, move the camera to the limit, press and hold the Zoom
In and Zoom Out buttons, and press the pan button (KTD-400) or the joystick (KTD-
404) in the direction of the limit.
Set the right autopan limit
store | | store
Note: On the KTD-400 or KTD-404, move the camera to the limit, press and hold the Zoom
In and Zoom Out buttons, and press the pan button (KTD-400) or the joystick (KTD-
404) in the direction of the limit.