GE Security Legend IP, User Manual

Page: 36 / 140

Legend IP
User Manual
28
Figure 22. Encoder page
Be sure to work with your network administrator while establishing the network connectivity of your domes.
The default settings on the encoder control settings are the following ( Figure 22 on page 28):
Table 3.
Setting Default
Enable network port Checked
Listen port 1024
Control port 9000
Streaming mode Sender
Streaming address 230.0.0.0
Streaming port 8090
Sender control port 8092
Receiver control port
1
1. This control will be removed in future releases.
8092
Enable auto discovery Checked