GE HEALTHCARE MAC 5500, Operator'S Manual

Page: 79 / 188

Editing Protocols
6. When you are done editing the stages of the Pretest phase, press Phase >
Exercise .
This opens the Exercise phase window.
7. Press the Stages/Manual function key to toggle between the Stages and
Manual modes of the phase as appropriate.
8. With the Stages mode selected, repeat step 5 to edit the stages of the Exercise
phase.
9. When you are done editing the stages of the Exercise phase, press Phase
> Recovery .
This opens the Recovery phase window.
10. Repeat step 5 to edit the stages of the Recovery phase.
11. When you are done editing the stages of the Recovery phase, press Phase >
Test End .
This opens the Test End phase window.
12. Select the report type to print during the Test End phase of the test.
Test End has only one stage, and Report Type is the only parameter you can
modify during the phase. You have two options: No Report or Final .
13. When done, press Menu .
This opens a menu with the following options:
• Return
• Edit protocol/phase names
• Save current protocol
• Print current protocol
• Edit different protocol
• Erase current protocol
• Restore default protocol
• Copy All to SD Card
• Restore All from SD Card
• Main Menu
14. Select Save current protocol to save your new or revised protocol.
15. Press Menu to open the Edit menu.
16. Do one of the following:
• To add or modify another protocol, press Edit different protocol and repeat
from step 2 .
• To return to the main menu, press Main Menu .
2046275-016B
MAC ® 5500/MAC ® 5500 HD
79