GE HEALTHCARE MAC 5500, Operator'S Manual

Page: 122 / 188

System Setup
Order Manager Interface (cont'd.)
Field Description
Auto order delete Determines whether an order will deleted automatically when the
associated ECG is deleted.
Select Yes to automatically delete an order when its associated ECG
is deleted.
An ECG is deleted automatically in either of the following conditions:
• The ECG has been successfully transmitted to a receiving system
and the Delete after transmit field on the Miscellaneous Setup
window is set to Yes .
• The ECG has been successfully transmitted to a receiving system
and has not been saved to the device.
The settings of the
Auto ECG Storage and Auto ECG
Transmission fields on the ECG Analysis setup window determine
which ECGs, and consequently which associated orders, are
deleted automatically:
• To delete all ECGs, use the following settings:
Auto ECG Storage : No ECGs .
Auto ECG Transmission : All ECGs .
• To delete only abnormal ECGs, use the following settings:
Auto ECG Storage : No ECGs .
Auto ECG Transmission : Only Abnormal ECGs .
• To delete only normal ECGs, use the following settings:
Auto ECG Storage : Only Abnormal ECGs .
Auto ECG Transmission : All ECGs .
Default order
locations Identifies the locations displayed on the prompt when downloading
orders. This will typically be the device's location (see
“Miscellaneous
Setup” on page 111 ).
If the device is used in multiple locations, enter multiple locations
and separate them with commas: 1,3,10, and so on.
Input Method
To configure the how the system's PS/2 port will be used, log on to the System Setup
screen, select Basic System > Input Method Select , and complete the fields described
in the following table.
122
MAC ® 5500/MAC ® 5500 HD
2046275-016B