GE HEALTHCARE MAC 5500, Operator'S Manual

Page: 108 / 188

System Setup
Use this option if you want to use the settings to quickly configure other MAC
systems. Be sure that an SD card is inserted into the system's card slot.
• To cancel, select Do not save setup .
7. Select Main Menu to exit System Setup .
Setting Up Automatic Tasks
The MAC system can be configured to perform the following tasks automatically:
• Power up into a specific function
• Preview the ECG before analysis
• Print a resting ECG report
• Print a signal averaged ECG report
• Perform ACI-TIPI Interpretation
• Store an ECG
• Transmit an ECG report
Setting Up Power Up Function
You can set up the system to start up into the function you use most often.
1. Log into the System Setup function.
Refer to “Process Overview” on page 107 .
2. Select Basic System .
3. Select Power Up Options .
4. Select the function you want the system to load on startup.
For more information, refer to “Power Up Options” on page 121 .
5. Press Return .
Setting Up ECG Preview
Preview allows you to review the ECG on screen before it is printed or stored. After
the ECG is displayed, you can select
Continue to print or store the ECG or Cancel
to discard it.
1. Log into the System Setup function.
Refer to “Process Overview” on page 107 .
2. Select ECG .
The ECG options are displayed.
3. Select ECG Analysis .
The analysis options are displayed.
4. In the Preview before analysis field, select Yes .
5. Press Return .
108
MAC ® 5500/MAC ® 5500 HD
2046275-016B