GE HEALTHCARE MAC 5500 Operator'S Manual Download Page 103

Page: 103 / 188

Using an SD Card

Updating Software from the SD Card

Software updates are provided on an SD card.

NOTE:

Before applying a software update, do the following:

• Confirm the update is compatible with the main board in your device.

• Updates with boot code version B4 or higher

cannot

be applied to devices

with the –007 main board (P/N 801212-007).

• Updates with software version 10A, 9C, or earlier cannot be applied to

devices with the –008 main board (P/N 801212-008).

• Connect the device to AC power.

Keep the device connected to AC power and do not power off the device during
the update.

Use the following procedure to apply updates.

Press

Power

to turn on the device.

From the

Main Menu

, select

System Setup

Enter the system password. and press

Enter

Press

Shift + F3

The following message is displayed:

Please Insert SD Card
Press ‘Esc’ to cancel

Insert the SD card.

The following message is displayed:

Current Version: xx.xx
New Software Version: yy.yy
Press 'Enter' to start update.

Press

Enter

NOTE:

If the device is not connected to AC power, the message

Please switch to AC

Power

is displayed. Connect the device to an AC outlet.

A series of messages flash on the screen to indicate the installation progress.
One of two things will happen:

• If the boot code on the device and the boot code on the SD card are the same

version, the following messages are displayed:

Programming Over
System will shut down
Press any key to continue...

Press any key to shut down the device. Skip to step

• If the boot code on the device and the boot code on the SD card are different

versions, the following messages are displayed:

Current Boot Version: xx.xx
New Boot Version: yy.yy
Press 'Enter' to start Installation

2046275-016B

MAC

5500/MAC

5500 HD

103

Summary of Contents for MAC 5500





























































































































































































Search results

Summary of Contents for MAC 5500

Reviews:

Related manuals for MAC 5500

Brands by name

Popular brands

GE HEALTHCARE MAC 5500, Operator'S Manual

Search results

Summary of Contents for MAC 5500

Reviews:

Related manuals for MAC 5500

Brands by name

Popular brands