GE HEALTHCARE MAC 5500 Operator'S Manual Download Page 104

Page: 104 / 188

Using an SD Card

Proceed to step

Do one of the following:

• To cancel the update to the boot code, press any key other than

Enter

The following messages are displayed:

Boot code not updated.
Can update later from service setup.

• To update the boot code, press

Enter

The following messages are displayed:

Programming Primary Boot
Programming Over
System will shut down
Press any key to continue...

Press any key to shut down the device.

After the device shuts down, press

Power

to restart the device.

On the

Resting ECG

screen, verify the software version has been updated.

104

MAC

5500/MAC

5500 HD

2046275-016B

Summary of Contents for MAC 5500





























































































































































































Search results

Summary of Contents for MAC 5500

Reviews:

Related manuals for MAC 5500

Brands by name

Popular brands

GE HEALTHCARE MAC 5500, Operator'S Manual

Search results

Summary of Contents for MAC 5500

Reviews:

Related manuals for MAC 5500

Brands by name

Popular brands