- 11 -
November 12, 2016
Installation Manual for SX-4000 Standalone
Integrated Media Block™
with Enterprise Storage/Enterprise Storage Plus
2. INSTALLING SX-4000 INTO THE PROJECTOR
2.1. Remove existing interface board/placeholders from
projector
Before installing SX-4000, see the guidelines below to ensure proper placement.
2.1.1.
Barco Projector Placement
Figure 3 shows an interface board (with SMPTE 292 inputs) connected to a Barco projector. This
board must be removed in order to install SX-4000.
Figure 3 Remove interface board from Barco projector.
Figure 4 SX-4000 Placement on Barco projector.
