- 29 -
November 12, 2016
Installation Manual for SX-4000 Standalone
Integrated Media Block™
with Enterprise Storage/Enterprise Storage Plus
6. SX-4000 NETWORK SETUP
6. SX-4000 NETWORK SETUP
The IP addresses on the SX-4000 may need to be changed for proper operation. The following
section shows the procedures.
6.1. IMB Network setup
Follow the following instructions to change the IP addresses on the SX-4000.
1.
From the
[SMS],
click on
[Configuration].
2.
Select
[Maintenance access]
from the top dropdown menu.
3.
Enter the password and select
[OK].
4.
Select [
IMB Network]
tab.
5.
Set the
[Subnet Mask]
for IMB Ethernet 2 and SOM IP address.
6.
Set the
[IP address]
for IMB Ethernet 2. This is the IP address of the Security
Manager.
7.
This is the main
[IP address]
of the SX-4000. The SMS interface can be reached at
this IP address using VNC.
8.
Set the
[Network gateway]
for the SX-4000.
9.
Set an
[IP address]
and
[Subnet Mask]
for
[IMB Ethernet 1]
of the SX-4000.
This is an optional network setting which can be used for IMB sync and Dolby Atmos
connections.
10.
Set an
[IP address]
and
[Subnet Mask]
for
[IMB Ethernet 3]
of the SX-4000.
This is an optional network which can be used to connect to a content management
network.
Figure 16 IMB Network [Configuration].
11.
Once the settings have been entered, click on
[Validate IPs].
12.
If all of the IP addresses are valid, you will get the following pop-up window:
11
5
6
7
8
9
10
