- 45 -
November 12, 2016
Installation Manual for SX-4000 Standalone
Integrated Media Block™
with Enterprise Storage/Enterprise Storage Plus
12. AUTOMATION SETUP
12.2. Automation setup for projectors
The SX-4000 supports automation for Barco, Christie and NEC projectors. Follow the steps below
to configure a projector device in the server automation interface.
1. Click
[Add]
button on
[Devices]
and enter the name of the device. In this case, it is
[PROJECTOR].
Set the device type to
[PROJECTOR]
(see Figure 41).
2. Click
[OK]
and set up the device parameters for the projector device (see Figure 42).
3. Enter the IP address of the projector device (see Figure 41).
4. Set the correct model of the projector. The port number will automatically change to the
default automation port number for the model. If the projector is a Series 2 projector,
select
[Series 2]
from the combo box.
5. Enter
[Login]
and
[Password]
for the projector if required.
6. Click
[Save]
to save the settings.
Figure 41 Automation settings for projector device.
1
3
4
4
5
6
