- 55 -
November 12, 2016
Installation Manual for SX-4000 Standalone
Integrated Media Block™
with Enterprise Storage/Enterprise Storage Plus
12. AUTOMATION SETUP
12.7 Automation setup for Dolby devices
The SX-4000 supports automation for the Dolby sound processors. Follow the steps below to
configure a Dolby device in the server automation interface. For this example, the device refers to
the Dolby CP650 Sound Processor.
1. Click
[Add]
under
[Devices]
and enter the name of the device. In this case, it is
[CP650].
Set the device type to
[DolbyCP650].
2. Click
[OK]
and set up the device parameters for the Dolby CP650 device.
Figure 51 Dolby CP650 automation device setup.
3. Enter the IP address of the Dolby CP650 device (see Figure 52).
2
1
