- 51 -
November 12, 2016
Installation Manual for SX-4000 Standalone
Integrated Media Block™
with Enterprise Storage/Enterprise Storage Plus
12. AUTOMATION SETUP
12.5. Automation setup for Christie ACT devices
The SX-4000 supports Christie ACT automation device. Follow the steps below to configure a
Christie ACT device in the server automation interface.
1. Click
[Add]
under
[Devices]
and enter the name of the device. In this case, it is
[ChristieACT].
Set the device type to
[ChristieACT].
2. Click
[OK]
and set up the device parameters for the Christie ACT device.
Figure 47 Christie ACT automation device setup.
3. Enter the IP address of the Christie ACT device (see Figure 48).
4. The default setting for the
[Port]
is displayed on the settings for the Christie ACT device.
Change this value if required.
5. Default control cues will be set up for a new Christie ACT automation device. Control
cues can be added or removed by clicking on the [+] and [-] buttons.
2
1
