- 39 -
November 12, 2016
Installation Manual for SX-4000 Standalone
Integrated Media Block™
with Enterprise Storage/Enterprise Storage Plus
9. CONTENT INGEST MANAGEMENT SETUP
9. CONTENT INGEST MANAGEMENT SETUP
9.1. Configuring a content ingest source
In order for the SX-4000 to ingest content, the ingest source must be configured. The following
sections describe the setup for content ingest from two different sources. The same steps can
be used to set up content ingest sources using other sources.
9.1.1. Content ingest from USB disk
The following steps describe the setup of a source for ingesting content from an external USB
hard drive:
1. From
[SMS],
click
[Control Panel].
2. Click
[Manage Content]
to access the Content Management Page.
3. Click
[Source],
followed by the
[Add].
This opens up the Source Setup Page. (please
refer to Figure 32)
4. Enter the name of the source in the
[Source Name...]
text box. In this example, we will
be setting up a USB source and naming it
[USB DRIVE].
Select
[USB]
as the Source
Type.
Figure 32 USB ingest source setup.
5. Click
[Save]
to save the settings for the USB content ingest source.
