- 32 -
November 12, 2016
Installation Manual for SX-4000 Standalone
Integrated Media Block™
with Enterprise Storage/Enterprise Storage Plus
7. SERIES 2 PROJECTOR SETUP
7. SERIES 2 PROJECTOR SETUP
The projector must be set up according to the requirements of the projector manufacturer to work
with the SX-4000.
7.1. Barco Series 2 Projector Setup
No system configuration is required for Barco Series 2 projector to work with SX-4000. The
Service Door/Marriage Tamper on the server must be cleared before SX-4000 can be used for
playback.
In order to use SX-4000 for content playback, the INPUT source of the projector macros should
be set to
“Media
B
lock”
(as shown in Figure 20). If the input file is not present, please download
and install the latest projector configuration files for your projector. For details, please refer to the
projector manual.
Figure 20 INPUT source settings on Barco Series 2 projector.
