Falcon 60+ (-1)
Falcon 60+ (-1)
Operations Manual
© 2003 General Binding Corporation
Page 6
Fig 1
Specifications
Operating Speed:
0 fpm to 18 fpm (5 mpm)
Maximum Film Width:
60 in. (152 cm)
Maximum Mounting Gap:
3/4 in. (1.91 cm)
Maximum Temperature:
270 OF (132 OC)
Dimensions (W x L x H):
Unit alone: (Figure 1)
79 in. x 33 in. x 57 in.
(201 cm x 84 cm x 145 cm)
Shipping:
85 in. x 44.5 in. x 78 in.
(216 cm x 113 cm x 198 cm)
Weight:
Unit alone: 1498 lb. (679 kg.)
Shipping: 1900 lb. (862 kg.)
Electrical Requirements:
Refer to the serial plate located on the rear of the
laminator for the specific electrical rating applicable
to the unit.
Voltage: 220V~60 Hz
Current: 24.5A
Power: 5500 W
Phase: Single
FCC NOTE: This equipment has been tested and
found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection
against harmful interference when the equipment is
operated in a commercial environment. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is
likely to cause harmful interference in which case
the user will be required to correct the interference
at his/ her own expense.
Changes or modifications not expressly approved by
General Binding Corporation could void the users
authority to operate the equipment.
This Class A digital apparatus complies with
Canadian ICES-003.
(Cet appareil numérique de las Classe A est
conforme a la norme NMB-003 du Canada)
Summary of Contents for Falcon 60+ (-1)
Page 1: ......
