![background image](http://html1.mh-extra.com/html/gbc/advancedpunch/advancedpunch_technical-and-service-manual_571056177.webp)
General Procedures
Advanced Punch Service Manual
© Copyright 2009 GBC. All rights reserved.
6-11
6.9.2
Outputs
The output signals can be exercised using the printer routines using NVMs.
6.9.3
Printer Communication
6.9.4
Serial EEPROM Control
For the Advanced Punch to operate, all optical sensors must be clear. Any blocked sensor
or open door will prevent operation. The machine may operate in bypass mode with or
without a chip tray or die set. Both of these must be present to punch.
Table 6.2Output Devices
Output
Type
Function
Diverter
DC Solenoid
Diverts paper from bypass to punch sections
Brake
DC Brake
Stops the punch mechanism, keeps it in correct position
Clutch
DC Clutch
Clutches the punch mechanism to drive through paper
Backstop
DC Solenoid
Provides stop for paper to rest against during punching
Transport
AC Motor
Provides paper movement through machine
Punch
AC Motor
Provides power to punch the paper
Stepper 1
PWM Signal
Controls Stepper Motor 1
Winding
ON signal for stepper holding current
Stepper 2
PWM Signal
Controls Stepper Motor 2
Winding
ON signal for stepper holding current
LED 1
Chip Tray
ON: Chip Tray missing, FLASHING: Chip Tray may be
full
LED 2
Die Set
ON: Die Set not installed properly
LED 3
Door
ON: Door is Open
LED 4
misfeed
ON: Paper mis-fed in Machine
LED 5
Punch On
ON: Punch Enabled
Table 6.3Printer Communication Devices
Device
Type
Function
Punch
Input
Printer turns on Punch enabled mode
Motor
Input
Printer turns on Advanced Punch Motor MT-C3 & VC-1
misfeed
Output
Punch signals a misfeed or the door is open (no
operation allowed)
Tray/Die
Output
Punch indicates tray or die set missing (bypass only
allowed)
Motor
Input
Printer turns on Advanced Punch motor BC-3 only
Table 6.4Serial EEPROM Device
Device
Type
Function
1 Input
3 Outputs
Counts number of punches for die set full, Saves value
Summary of Contents for AdvancedPunch
