![background image](http://html1.mh-extra.com/html/gbc/advancedpunch/advancedpunch_technical-and-service-manual_571056127.webp)
Repair and Adjustment Procedures
Advanced Punch Service Manual
© Copyright 2009 GBC. All rights reserved.
4-69
4.10Belt Replacement
Maintenance Schedule
Inspect every 750K cycles.
Replace as needed.
Procedure
Inspect all timing belts for wear, missing teeth, frayed edges, and cracks. The belts
should be slightly loose with approximately 1/4” deflection [1]. Belts that are too
loose will not drive properly and belts that are too tight can wear out prematurely
or damage their driven components.
Figure 4.79 Typical Belt Deflection.
To replace belts:
1. Loosen the screws of the 3 belt idlers [1].
Installation Note:
When setting the belt tension, adjust the belt idlers so that the
belt has approximately 1/4" of deflection.
Figure 4.80 Belt Idler Locations.
[1]
[1]
[1]
[1]
Summary of Contents for AdvancedPunch
