Gateway Solo 9500, User Manual

Page: 235 / 314

227
Recalibrating the battery
www.gateway.com
Recalibrating the battery
If your notebook unexpectedly goes into Standby mode while you are using
it but the battery charge is not low, you may need to recalibrate your battery.
You should also recalibrate the battery once a year to maintain the accuracy
of the battery gauge.
To recalibrate the battery:
1
Connect the AC adapter, then turn on your notebook.
2
As soon as it starts and you see a startup screen, press F2. The BIOS Setup
program opens.
3
Open the
Advanced
menu.
4
Highlight
Battery Auto Learning
, then select
Enabled
by pressing the
spacebar.
5
Open the
Exit
menu, then highlight
Exit Saving Changes
and press E
NTER
.
6
Select
Yes
, then press E
NTER
.
The battery learning process begins and a screen opens showing you the
progress. The entire process will take several hours.
When the recalibration is done, the message “Press [Esc] key to exit”
appears.
7
Press
E
SC
. The battery meter now displays the accurate battery charge.
If the battery meters do not show an accurate charge, contact Gateway
Technical Support.
Important Do not interrupt the battery recalibration process. If
recalibration is interrupted, you must start the process over
again.