CHAPTER 2: Setting Up Your Server
www.gateway.com
18
Starting your server
Before you start your server for the first time:
■
Make sure that the server and monitor are plugged into a power outlet
or surge protector and that the surge protector (if you are using one) is
turned on.
Caution
When you connect peripheral devices to
the server, make sure that your server and
devices are turned off and the power
cords are unplugged.
■
Make sure that all cables are connected securely to the correct ports and
jacks on the back of the server.
To start the server:
1
Turn on any peripheral devices connected to the server.
2
Press the power button (1), the Power LED (2) lights.
If nothing happens when you press the power button:
■
Make sure that the power cable(s) is plugged in securely and that
your surge protector (if you are using one) is plugged in and turned
on.
■
Make sure that the monitor is connected to the server, plugged into
the power outlet or surge protector, and turned on. You may also
need to adjust the monitor’s brightness and contrast controls.
■
If you cannot find the cause of the power loss, contact Gateway
Customer Care. For more information, see
.
3
The first time you turn on the server, any pre-installed operating system
may begin asking you for configuration settings. See your operating
system’s documentation for instructions on configuring advanced settings
for your specific network.
Summary of Contents for E-9425R
