Gateway E-155C, Technical Reference Manual

Page: 69 / 147

CHAPTER 5: Managing Power
62
Recharging the battery
The battery recharges while it is installed and your convertible
notebook is connected to AC power. While the battery
recharges, the battery charge indicator turns on.
Changing the battery
Replacing the battery
To replace the battery:
1
Disconnect your convertible notebook from the optional
port replicator.
2
If your convertible notebook is on and is connected to
AC power, go to Step 3 .
-OR-
If your convertible notebook is on and is not plugged into
an AC outlet, save your work and turn off the convertible
notebook.
3
Make sure the LCD panel is in notebook mode, then close
the LCD panel. For more information, see “Converting
from notebook to tablet mode” on page 37 .
4
Turn your convertible notebook over so the bottom is
facing up.
Warning
Danger of explosion if battery is incorrectly replaced.
Replace only with a battery specifically manufactured for your MPC
convertible notebook. Discard used batteries according to local hazardous
material regulations.
The battery used in this device may present a fire or chemical burn hazard if
mishandled. Do not disassemble, heat above 212°F (100°C), or incinerate.
Dispose of used batteries promptly. Keep away from children.
Caution
If your convertible notebook is connected to AC power you can change
the battery while the convertible notebook is turned on. If your convertible
notebook is not plugged into an AC outlet, you must turn the convertible
notebook off while changing the battery.