GatesAir Intraplex NetXpress Installation And Operation Manual Download Page 120

Page: 120 / 163

Intraplex NetXpress IP Multiplexer

4—System Configuration and Operation

Version 3.05

4-66

GatesAir, Inc.

Intraplex Products

Get Next Requests Sent:

The total number of SNMP Get-Next PDUs generated by the NetXpress SNMP

Agent.

Set Requests Rcvd:

The total number of SNMP Set-Request PDUs accepted and processed by the

NetXpress SNMP Agent.

Set Requests Sent:

The total number of SNMP Set-Request PDUs sent by the NetXpress SNMP Agent to

another SNMP protocol entity in the network.

Total Variables Requested:

The total n

umber of requested variables - number of variable bindings

processed by the NetXpress SNMP agent

Total Variables Set:

The n

umber of objects altered successfully by the NetXpress SNMP Agent as the

result of receiving valid SNMP Set-Request PDUs.

Traps Rcvd:

The total number of unsolicited messages (traps) received by the NetXpress SNMP

Agent from another SNMP protocol entity in the network.

Traps Sent:

The total number of SNMP Trap PDUs generated by the NetXpress SNMP Agent.

Too Big Rcvd:

The total number of SNMP PDUs received by the NetXpress SNMP Agent for which the

value of the error-status field was “tooBig”.

Too Big Sent:

The total number of SNMP PDUs generated by the NetXpress SNMP Agent for which the

value of the error-status field was “tooBig”.

No Such Name Rcvd:

The total number of SNMP PDUs received by the NetXpress SNMP Agent for which

the value of the error-status field was “noSuchName”.

No Such Name Sent:

The total number of SNMP PDUs generated by the NetXpress SNMP Agent for

which the value of the error-status was “noSuchName”.

Bad Value Rcvd:

The n

umber of SNMP PDUs received by the NetXpress SNMP Agent for which the value

of the error-status field is “badValue”.

Bad Value Sent:

The total number of SNMP PDUs generated by the NetXpress SNMP Agent for which the

value of the error-status field was “badValue”.

Generic Error Rcvd:

The total number of SNMP PDUs received by the NetXpress SNMP Agent for which

the value of the error-status field was “genErr”.

Generic Error Sent:

The total number of SNMP PDUs generated by the NetXpress SNMP Agent for which

the value of the error-status field was “genErr”.

Bad Versions Rcvd:

The total number of SNMP messages received by the NetXpress SNMP Agent for an

unsupported SNMP version.

Bad Community Names Rcvd:

The total number of SNMP messages received by the NetXpress SNMP

Agent using an SNMP community name not known to the entity.

Bad Community Uses Rcvd:

The total number of SNMP Messages received by the NetXpress SNMP

Agent representing an SNMP operation not allowed by the SNMP community named in the message.

ASN Parse Errors:

The total number of ASN.1 or BER errors encountered by the NetXpress SNMP Agent

when decoding received SNMP messages.

Readonlys Rcvd:

The n

umber of valid SNMP PDUs delivered to the SNMP protocol entity for which the

value of the error-status field is “readOnly”, indicating incorrect implementation of SNMP.

4.4.6.5 UDP Statistics

This page (Figure 4-73) reveals User Datagram Protocol (UDP) statistical information. A datagram is an
independent, self-contained message sent over the network. To access the

UDP Statistics

page, point to

Performance

and click

UDP

Summary of Contents for Intraplex NetXpress




































































































































































Search results

Summary of Contents for Intraplex NetXpress

Reviews:

Related manuals for Intraplex NetXpress

Brands by name

Popular brands

GatesAir Intraplex NetXpress, Installation And Operation Manual

Search results

Summary of Contents for Intraplex NetXpress

Reviews:

Related manuals for Intraplex NetXpress

Brands by name

Popular brands