GatesAir Intraplex NetXpress, Installation And Operation Manual

Page: 110 / 163

Intraplex NetXpress IP Multiplexer 4—System Configuration and Operation
Version 3.05
4-56 GatesAir, Inc.
Intraplex Products
This page shows information from the previous Stream Creation pages.
Cancel: Click this button to return to the Streams Table page without creating a new stream.
Prev: Click this button to return to the Stream Creation – Stage 4 page.
Create: After assuring all entries are correct, click this button to actually create the stream.
Create & Activate: After assuring all entries are correct, click this button to create and activate the
stream on the shelf. This button is enabled only if TDM bus is connected to an IP port in the TDM bus
map.
TDM to TDM Stream Creation
Figure 4-60. Stream Creation – Stage 2 (TDM to TDM) Page
Stream Name: The unique name entered in Stage 1 that describes the stream.
Stream Direction: Whether the stream is One Way (receive or transmit) or Both .
Source TDM Bus: Click the TDM bus or external T1/E1 interface on the list that is the source for the
stream: TDM Bus 1A , TDM Bus 2A , TDM Bus 1B , TDM Bus 2B , E1 Port A , E1 Port B , T1 Port A ,
or T1 Port B . For bidirectional streams, it does not matter which of the two busses is selected to be
the source.
Destination TDM Bus: Click the TDM bus or external T1/E1 interface on the list that is the
destination for the stream: TDM Bus 1A, TDM Bus 2A, TDM Bus 1B, TDM Bus 2B, E1 Port A, E1
Port B, T1 Port A, or T1 Port B . For bidirectional streams, it does not matter which of the two
busses is selected to be the source.
Source TDM Channel Start: Type the number of the starting time slot (channel) on the source TDM
bus or external T1/E1 port for this stream.
Destination TDM Channel Start: Type the number of the starting time slot (channel) on the
destination TDM bus or external T1/E1 port for this stream.