GatesAir Intraplex NetXpress, Installation And Operation Manual

Page: 69 / 163

4—System Configuration and Operation Intraplex NetXpress IP Multiplexer
Version 3.05
GatesAir, Inc. 4-15
Intraplex Products
Figure 4-19. Networking | SNMP Configuration Page
2. Type the SNMP Read-Only Community name for read-only access.
3. Type the SNMP Read-Write Community name for read/write access.
4. Click Submit .
4.2.3.10 Configuration Backup/Restore
You can operate the NetXpress multiplexer without performing this procedure. However, we recommend
you save your configuration files.
1. Point to System Cfg and click Configuration Backup (Figure 4-20).
Figure 4-20. System Cfg | Configuration Files Backup/Restore Page
2. Type the Config Backup Server IP address, the address of an available FTP server.
3. Type the Config Backup Server Directory where the configuration files should be stored.
4. Type the Username .
5. Type the Password .
6. Click Submit to store these values.
7. Click on the Streams table header to back up the configuration files to the server.