Intraplex NetXpress IP Multiplexer
4—System Configuration and Operation
Version 3.05
4-50
GatesAir, Inc.
Intraplex Products
In-Service Telephony Streams:
The number of telephony (voice signaling) streams now in service.
Total Stream Bandwidth (kbits/sec):
The total bandwidth (in kilobits per second) required for stream
traffic if you were to activate all of the streams listed in the table.
Total Number of FEC Streams:
The total number of IP packet streams using forward error correction.
Total Number of Telephony Streams:
The total number of telephony (voice signaling) streams.
ID:
An assigned index that uniquely identifies each stream.
Name:
The description label that you may assign to the stream. If you point to the stream name with
your cursor, additional stream details appear.
Destination:
The destination (IP address or electrical interface) for the stream.
Direction:
Whether the stream is set to
Transmit
,
Receive
, or
Both
. Multicast streams are always
simplex (that is, either
Transmit
or
Receive
).
Date Created:
The time and date when this stream was created.
Up Time:
The length of time this stream has been continuously operational.
Operational State:
The actual operational state of the stream (
Up
,
Down
,
In
Progress
).
Admin State:
Provisioned state of the stream session (
In
Service
,
Out
of
Service
). This state is used
to provide administrative control information regarding the last state that was requested of the stream.
Table 4-1 shows the meaning of operational state/administrative state combinations.
Table 4-1. States Associated with Streams
Administrative
State
Operational
State
Definition
Out of Service
Down
Created stream not currently in service.
In Service
Down
For bidirectional and receive streams, you have put the stream in service, but the
NetXpress system has not received any packets. Transmit only streams have this
combination if the interface is down or a route does not exist to the destination.
Out of Service
Up
Not possible.
In Service
Up
You have put the stream in service, and the NetXpress system has received packets.
In Service
In Progress The process of activating the stream is proceeding.
Put stream in service/out of service:
Click
for a specific stream to put the stream in service
(activate it). Click
on the header row to put all streams in service. Click the ID of individual streams in
order to select multiple streams and then click
or
on the header row to change the admin state of
many streams at once. Click
for a specific stream to put the stream out service (deactivate it). Click
on the header row to put all streams out service.
Add/Edit/Delete:
Click to add a stream, to edit a stream, or
to delete a stream. Click
in the
header row to delete all streams.
Clock:
The
next to the stream name indicates that it has been selected as a timing stream.
Phone:
The
next to the stream name indicates that voice signaling is enabled for the stream. The
color code of this icon matches that of the Operational State (green=no alarm or alert; yellow=alert; and
red=alarm).
4.4.5.1 Stream Creation
To add a packet stream, click on the
Streams
table. The
Stream Creation – Stage 1
page appears
(Figure 4-54).
Summary of Contents for Intraplex NetXpress
