24
Initial Start-up
(1)
Power on / off
(2)
Lock touch-panel for protection against unauthorized modification (to unlock the touch-panel, touch both
buttons 2 and 5 at the same time)
(3)
(a, b) Decrease or increase the overall power level of all zones combined
(4)
Decrease or increase the power level of the respective warming zone
(5)
Unlock touch-panel (touching both button 2 and 5 at the same time)
(6)
Infrared receiver
Touch-Panel Status-LEDs
Power Level 1 (lowest temperature)
Power Level 2
Power Level 3
Power Level 4 (highest temperature)
Warning LED: The glass top might be hot from reflected heat by the warmed pot
The flashing of all LEDs at the same time indicates that too many buttons are touched at the same time. Among
other things, this can happen while cleaning or when liquid is placed on top of several buttons. The touch-panel
does not react during this period, but the warming function of the device is not affected.
Functions of the Remote Control
(1)
Power on / off
(2)
Lock / unlock touch-panel
(3)
(a, b) Decrease or increase the overall power level of all zones combined
(4)
Decrease or increase the power level of the respective warming zone
Summary of Contents for InductWarm 20
