36
2.14 Electronic multiple wash programs dishwashers
(Special instructions for dishwashers with electronic timer)
1. Turn the main switch to the PROGRAM position. The corresponding pilot light
will turn on.
2. The PROGRAM SELECTOR pilot light will start blinking.
3. Select the required program: STANDAR (2 min.), SHORT (1 min.) or INTENSIV (3
min).
4. The programme will begin and the PROGRAM SELECTOR pilot light will remain
on until the program has been completed.
5. When the washing programme is completed, the PROGRAM SELECTOR pilot
light will start blinking again.
6. If the door is opened whilst the appliance is in operation, the programme will be
interrupted and the time zeroed.
7. In the electronic models with a drain hose, turn the main switch to the OFF
position and then to the DRAINAGE position. The corresponding pilot light will
turn off and then on. Pull out the plastic waste pipe, close the door, press and
hold the START button for 3΄΄. The appliance will discharge the tank water in 2΄.
The PROGRAM SELECTOR pilot light that was blinking remains constantly on.
When it starts blinking again, the discharge is completed. Turn the main switch
to the OFF position and put the plastic waste pipe back in its place.
NOTE: If the door is opened during the drainage, the operation will be interrupted.
To restart the appliance, close the door and press the START button again.
* the asterisk is a reference to the special instructions for dishwashers with
electronic multiple wash programs timer (TYPE 400, 500, 1100, 1500) see
paragraph 2.14.
39
