start-up, which interrupts power supply to the pump, in case of overcharge.
There are thermal safety fuses, which interrupt the power supply in case of boiler
or dispenser overheating.
2.8.1 Further significant indications / Safety indications
No technical modifications are allowed in this appliance. The manufacturer is not
responsible for any possible damages resulting due to modifications. The same
applies in case that the appliance is used for any other purpose except the one
anticipated, in case of fault or improper use.
The water inside the dishwasher is not potable.
Use, maintenance and repair of dishwasher should be performed only by persons
familiar with these works and informed for any possible risks.
2.8.2 Daily works
•
Turn off the operation switch of the appliance (No.1- Page 3).
•
Turn off the main switch / fuses.
•
Turn off water supply faucet.
•
Empty the washing dispenser removing the overflow pipe after turning off the
switch ON-OFF (No.1- Page 3) to avoid overcharging the tank and causing
damage to the dishwasher.
•
If the dishwasher is equiped with draining pump, follow the above mentioned
steps and then press the start button once in order to start the automatically 2
minutes drainning program. (ATT: during the drainning program the door must
remain closed.)
2.9 Maintenance / Care / Repair
The perfect operation and safe use may be ensured only through the correct use
of the appliance, as well as the compliance with the operation instructions, the
corresponding specifications and the care and cleaning indications.
This applies both for the compliance of the provisions of law on appliance safety
(GSG) and the existing specifications of ZH 1 and VBG on accident prevention.
31
RECOMMENDATION:
Before cleaning or maintenance works, the appliance
should not be connected with voltage through the installed main switch / fuse.
The appliance should never be sprayed with water or high pressure cleaning aid,
because any insertion of water in the electrical elements may affect the regular
operation of the appliance as well as the protection against electrical shock
(insulating protection).
We recommend that you prepare a relevant maintenance agreement for all
maintenance and repair works with our company (or with a service team /
workshop of an authorized local dealer who sold the appliance).
All works / repairs performed in this appliance must be reported on the last page
of the operating instructions, along with the signature / company name.
Substantially, no safety arrangement should be put out of operation. If the
disassembly of individual safety arrangements is required, e.g. for maintenance
or repair works, the reassembly of the relevant safety arrangements should be
performed immediately after the completion of works.
2.9.1 Unloading the water from the dishwasher’s tank (dispenser)
•
Turn OFF (No 1 - Page 3) the power of the dishwasher
•
Empty the washing dispenser removing the overflow hose.
•
If the dishwasher is equiped with draining pump, follow the above mentioned
steps and then press the start button once in order to start the automatically 2
minutes drainning program. (ATT: during the drainning program the door must
remain closed.)
•
Remove the filter and clean it carefully with water.
•
Rinse the washing compartment to remove any dirt residues.
Then, reassemble the parts in reverse order. The appliance should never operate
without a filter.
During non-operation, the door should remain half-open or completely open (in
order to avoid odours).
2.9.2 Regular maintenance and cleaning works
Regularly, you should remove the rotating arms and sprinkler, clean them
carefully with water and reposition the parts in reverse order. This work should
UK
UK
33
