32
be performed with great care.
PAY ATTENTION TO THE CORRECT POSITION OF FILTERS AND SPRINKLER!
Do not clean the sprinkler’s injectors with tools or sharp objects.
You may clean the appliance with warm water and conventional cleaning aids.
Rub with water and then let it dry. The stainless steel parts should be treated with
special means for steel and you should never clean them with steel wire, brush,
etc. Also, you should never let them touch the surface, since even the lightest
contact with the surfaces may cause rust formation.
You should use brushes made of polymer plastic or natural brushes or thin wire.
You should take care to move towards the smoothing direction, so that you will
not scratch the surface. Finally, rinse with clean water and dry thoroughly.
We remind you that corrosion (rust formation) on stainless steel surfaces is not
created by itself, but rather due to the use of improper cleaning aid (e.g. whitening
or particularly caustic cleaning aid based on chlorine).
Following a particular period of use, calcium sediments are formed in the internal
walls of the dispenser (due to mineral particles in the water), which may affect
the correct operation of the appliance. For this reason, regular removing of salt
formations is required.
We recommend letting this work (removing of salt formations) to be performed by
specialized personnel (or by an authorized local dealer who sold the appliance).
2.10 Customer service
If you face any problems during the use of your appliance, we kindly ask you to
refer to our company (or to the authorized local dealer who sold the appliance).
2.11 Spare parts, Accessories and Components
All spare parts and components can be found in the authorized local dealer, who
sold this appliance, or directly in our company.
In case of claims or complaints, you should necessarily report the model and
serial number of the appliance / machine. These can be found on the label that is
attached on the appliance.
33
PROBLEM
CAUSE
SOLUTION
The dishwasher does not
operate properly
Connection interruption
Check the connection
You have not turned
the switch N1 of the
appliance on
Turn the switch N1 on
Main switch / or fuse has
not been activated / or it
is faulty
Check the main switch /
or fuse
The dishwasher does not
operate properly
The switch N1 of the
appliance is faulty
Refer to the authorized
local dealer who sold the
appliance or directly to
the manufacturer
The water inlet valve is
faulty
The door is not closed
Close the door
You have not turned the
water supply on
Turn the supply on
The appliance operates,
but the switch LED does
not light on
The LED is faulty
Change the LED
Boiler heating does not
operate
Switch N1 or main
switch or fuse has not
been activated
Check the switch N1 of
the appliance and the
main switch or fuse
The safety thermostat of
the boiler is faulty
Refer to the authorized
local dealer or the
manufacturer
The 93
o
C thermal fuse of
the boiler is faulty
Boiler heating does not
operate
Pressure stator is faulty Refer to the authorized
local Dealer who sold
the appliance or directly
to the manufacturer
‘Boiler heating’ relay is
faulty
Boiler fuse is burned out
2.12 Troubleshoot
UK
34
