GC-IMS
– User Manual
184/214
Device Connector Pinout
Connector
type
D-Sub DA-15 female
Analog
output
Return
2
Output #2
Output #1
____________________
2
Pin 1 is common return for both
analog outputs and for the digital
transistor output
Pin 1
Pin 2
Pin 9
Digital
input
Negative
Positive
Pin 4
Pin 5
Digital
output
Negative
3
Positive
____________________
3
Pin 1 is common return for both
analog outputs and for the digital
transistor output
Pin 1
Pin 6
Relais
output
Common
NC
NO
Pin 11
Pin 3
Pin 13
INFORMATION!
•
Relais is energized if no fault was detected.
•
Relais will de-energized not later than 40 seconds after MCU
failure.
•
Availabiliy of I/Os is device dependent.
•
Do not connect any other pins.
INFORMATION!
•
If an external trigger is inserted into the run of a triggered
running measurement is applied, it is completely ignored. A
Summary of Contents for GC-IMS
