Garmin SOCATA TBM850, Pilot'S Manual

Page: 73 / 684

190-00709-04 Rev. A
Garmin G1000 Pilot’s Guide for the Socata TBM 850
59
FLIGHT INSTRUMENTS
Changing altimeter barometric pressure setting units:
1)
Press the PFD Softkey to display the second-level softkeys.
2) Select the ALT UNIT Softkey.
3) Select the
IN
Softkey to display the barometric pressure setting in inches of mercury (in Hg).
Or , select the
HPA
Softkey to display the barometric pressure setting in hectopascals (hPa).
4) Select the BACK Softkey twice to return to the top-level softkeys.
If the barometric altimeter settings differ between PFDs by more than 0.02 in Hg, the readouts turn yellow
(Figure 2-11). The settings can be synchronized from the AUX - System Setup Page on the MFD. Once the
settings are synchronized (BARO SYNCHRONIZAT turned on), they remain synchronized for the entire flight.
Synchronizing the altimeter barometric pressure settings:
1) Select the AUX - System Setup Page using the
FMS
Knob.
2)
Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight Baro in the Synchronization box.
4) Turn the small
FMS
Knob clockwise to ON or counterclockwise to OFF.
5)
Press the FMS Knob to remove the cursor.
Figure 2-11 Baro Synchronization Setting
(AUX - System Setup Page)
Barometric Settings
not Synchronized on PFD