Garmin SOCATA TBM850, Pilot'S Manual

Page: 305 / 684

190-00709-04 Rev. A
Garmin G1000 Pilot’s Guide for the Socata TBM 850
291
FLIGHT MANAGEMENT
13) Note the altitude constraints associated with each of the approach waypoints as seen in Figure 5-130. These
altitudes are loaded from the database and are initially displayed as white text, indicating these values are not
used in computing vertical deviation guidance. The altitude values must be designated for use by the pilot if
they are to be used in computing vertical guidance.
a) Press the
FMS
Knob to activate the cursor.
b) Turn the large FMS Knob to place the cursor in the altitude field associated with the IAF at HABUK as in Figure
5-130.
Figure 5-130 Designate HABUK Altitude Constraint
c) Press the
ENT
Key. Note the altitude is now displayed as light blue text, indicating that the value is now used
in computing vertical guidance. The G1000 is using baro corrected altitude when giving vertical guidance to
these waypoints.
d)
Turn the large FMS Knob to select the altitude constraint associated with FALUR as seen in Figure 5-131.
Figure 5-131 Designate FALUR Altitude Constraint
e)
Press the ENT Key to designate this altitude constraint value for use in computing vertical guidance. This
altitude value is now displayed as light blue text. Note that altitude values are now filled in for waypoints back
to where the previous altitude value was entered for OPSHN.