Garmin SOCATA TBM850, Pilot'S Manual

Page: 414 / 684

Garmin G1000 Pilot’s Guide for the Socata TBM 850
190-00709-04 Rev. A 400
HAZARD AVOIDANCE
Manually clearing Stormscope data on the Navigation Map:
1)
Press the
MENU
Key.
2) Select ‘Clear Stormscope
®
Lightning’ (Figure 6-117).
3) Press the ENT Key.
Figure 6-117 Navigation Map Page Options Menu
ZOOM RANGE ON THE NAVIGATION MAP
Stormscope lightning data can be displayed up to 800 nm zoom range (in North Up orientation) on the
Navigation Map Page. However, in Track Up orientation at the 500 nm range, a portion of Stormscope lightning
data can be behind the aircraft and therefore not visible on the Navigation Map. Since the range for Stormscope
data is 400 nm diameter total (200 nm in front and 200 nm behind), the 500 nm range in North Up orientation
shows all the data.
At a map range of less than 25 nm, Stormscope lightning data is not displayed, but can still be present.
The maximum zoom range can also be set on the Navigation Map. Note that Stormscope data above the
selected maximum zoom range is decluttered.
Selecting a Stormscope range on the Navigation Map:
1) Press the MENU Key.
2) Select ‘MAP SETUP’.
3) Select the ‘Weather’ group.
4)
Press the ENT Key.
5) Turn the
large
FMS Knob to select ‘STRMSCP SMBL’.
6) Turn the small FMS Knob to select the maximum display range.
7)
Press the
ENT
Key.
8) Press the FMS Knob to return to the Navigation Map Page.
To change the display range on the Navigation Map Page, turn the
RANGE
Knob
clockwise to zoom out or
counter-clockwise to zoom in.