Garmin SOCATA TBM850, Pilot'S Manual

Page: 642 / 684

Garmin G1000 Pilot’s Guide for the Socata TBM 850
190-00709-04 Rev. A 628
APPENDIX A
GDL 69A MESSAGE ADVISORIES
Message Comments
GDL69 CONFIG
– GDL 69 config
error. Config service req’d.
GDL 69 configuration settings do not match those of backup configuration memory.
The G1000 system should be serviced.
GDL69 FAIL – GDL 69 has failed. A failure has been detected in the GDL 69. The receiver is unavailable. The G1000
system should be serviced
MANIFEST
– GDL software mismatch,
communication halted.
The GDL 69 has incorrect software installed. The G1000 system should be serviced.
GWX 68 MESSAGE ADVISORIES
Message Comments
GWX CONFIG – GWX config error.
Config service req’d.
GWX 68 configuration settings do not match those of the GDU configuration. The
G1000 system should be serviced.
GWX FAIL – GWX is inoperative. The GDU is not recieving status packet from the GWX 68 or the GWX 68 is reporting
a fault. The GWX 68 radar system should be serviced.
GWX SERVICE
– GWX needs service.
Return unit for repair.
A failure has been detected in the GWX 68. The GWX 68 may still be usable.
WX ALERT – Possible severe weather
ahead.
The GWX 68 indicates severe weather within ±10º of the aircraft heading at a range
of 80 to 320 nm.
MANIFEST
– GWX software
mismatch, communication halted.
The GWX 68 has incorrect software installed. The G1000 system should be serviced.
GDC 74B MESSAGE ADVISORIES
Message Comments
ADC1 ALT EC
– ADC1 altitude error
correction is unavailable.
GDC1 or GDC2 is reporting that the altitude error correction is unavailable.
ADC2 ALT EC – ADC2 altitude error
correction is unavailable.
ADC1 AS EC
– ADC1 airspeed error
correction is unavailable.
GDC1 or GDC2 is reporting that the airspeed error correction is unavailable.
ADC2 AS EC
– ADC2 airspeed error
correction is unavailable.
MANIFEST – GDC1 software
mismatch, communication halted.
The GDC 74B has incorrect software installed. The G1000 system should be serviced.
MANIFEST
– GDC2 software
mismatch, communication halted.
GTS 820 MESSAGE ADVISORIES
Message Comments
GTS CONFIG – GTS config error.
Config service req’d.
The GTS and GDU have incompatible configurations. This alert is also set when the GTS
has an invalid mode S addres sconfigured or the mode S address does not match both
XPDR mode S addresses.
MANIFEST
– GTS software
mismatch, communication halted.
The GTS has incorrect software installed. The G1000 system should be serviced.