Garmin RINO 520 - Hiking GPS Receiver Owner'S Manual Download

Page: 91 / 132

nIt

peratIon

etup

ages

Rino

520/530 Owner’s Manual

Units.Setup.Page

The Units features are best used by individuals with a

working knowledge of map grids and datums. To learn

more about these subjects, visit the National Imagery and

Mapping Agency at

http://www.nima.

mil

or inquire at your local library.

To.access.the.Units.Setup.

page:

1. Press the

Page/Quit

button or

the

Main.Page

button to open

the Main Menu.

2. In the Main Menu, scroll down

and select

Setup

3. Select the

Units

icon to open the Units Setup

page.

Position Format

—Allows you to choose from different

grid formats. The default position format, ‘hddd°mm.

mmm’ displays the latitude and longitude in degrees and

minutes and is most commonly used.

LORAN.TD.Format

When creating new waypoints using LORAN TD

coordinates, you must set the correct LORAN chain

number and secondary stations in the Setup TD field

before storing the waypoint. After the waypoint is

stored in unit memory, it always

references the LORAN chain

number and secondary stations

currently selected in the Setup

TD field. If you enter a different

LORAN chain number, change the

secondary stations, or offsets in the

Setup TD field, the active waypoint

information reflects those changes. Because the unit

does not rely on the LORAN signal for navigation, it can

reference a different GRI chain and/or secondary stations

and still navigate to the location stored in memory.
To adjust the settings, select

Loran TD

as the Position

Format to open the Loran TD setup window. To change

the settings of any fields, highlight the field, press the

Thumb Stick

In. When done, highlight

Save

and press In.

Units Setup Page

Loran TD Setup

Summary of Contents for RINO 520 - Hiking GPS Receiver





































































































































Search results

Summary of Contents for RINO 520 - Hiking GPS Receiver

Reviews:

Related manuals for RINO 520 - Hiking GPS Receiver

Brands by name

Popular brands

Garmin RINO 520 - Hiking GPS Receiver, Owner'S Manual

Search results

Summary of Contents for RINO 520 - Hiking GPS Receiver

Reviews:

Related manuals for RINO 520 - Hiking GPS Receiver

Brands by name

Popular brands