Garmin GPS 18 - Deluxe USB Sensor Help Manual Download Page 80

Page: 80 / 130

Move Up

and

Move Down

Arrows

—select the desired Via point and click the Move Up or Move

Down arrows to rearrange the position of that point in the route list.

Properties

—shows the properties of the selected Via point.

Insert Waypoint

—to insert a waypoint into the route, click this button, select the desired waypoint, and

click

Invert

- Inverts the order of all the Via points in the route.

Recalculate

—recalculates the driving directions for the route.

Show Profile

—click to display the Vertical Route Profile of the elevation of the Via points.

NOTE

: This

feature is only available on MapSource products that contain elevation data.

Center Map on Selected Item

—check this box to show the selected Via point in the center of the Graphic

Map.

Show on Map

—shows the entire route on the Graphic Map.

Link

—this feature allows you to include a link to a file or URL containing information related to the route.

For example, you could link to an electronic document containing a description of your route, a digital photo
you took while on the route, or a Web site devoted to the area the route is in. You can enter the desired

file name/URL or click

Browse

to select the desired file. Click the

Open Link

button

to activate the

link.

4. Click

to save your changes.

Summary of Contents for GPS 18 - Deluxe USB Sensor



































































































































Search results

Summary of Contents for GPS 18 - Deluxe USB Sensor

Reviews:

Related manuals for GPS 18 - Deluxe USB Sensor

Brands by name

Popular brands

Garmin GPS 18 - Deluxe USB Sensor, Help Manual

Search results

Summary of Contents for GPS 18 - Deluxe USB Sensor

Reviews:

Related manuals for GPS 18 - Deluxe USB Sensor

Brands by name

Popular brands