Garmin GPS 18 - Deluxe USB Sensor Help Manual Download Page 26

Page: 26 / 130

Using the Status Tab

The Status Tab shows your current speed, direction, and elevation. You can access the Status Tab by clicking
on it or pressing

on your keyboard.

The Status Tab includes the following features:

Speed

—your current speed.

Heading

—your current heading.

Elevation

—your current elevation.

Address

—the street address closest to your current location.

Next Street

—the next cross street you are approaching.

Compass

—the red line indicates North. The green line at the top of the compass indicates your current

heading. When you are navigating on a direct route, a black arrow showing the direction to the next waypoint
appears on the compass. See Understanding Routes for more information.

Dist (Maneuver)

—the estimated distance to the next maneuver in the route.

Dist (Destination)

—the estimated distance to the end of the route.

Time (Maneuver)

—shows the total time remaining until the next maneuver.

Time (Destination)

—shows the total time remaining until you reach your destination.

ETA (Maneuver)

—the estimated time of day you will arrive at the next maneuver.

ETA (Destination)

—the estimated time of day you will arrive at the end of the route.

Summary of Contents for GPS 18 - Deluxe USB Sensor



































































































































Search results

Summary of Contents for GPS 18 - Deluxe USB Sensor

Reviews:

Related manuals for GPS 18 - Deluxe USB Sensor

Brands by name

Popular brands

Garmin GPS 18 - Deluxe USB Sensor, Help Manual

Search results

Summary of Contents for GPS 18 - Deluxe USB Sensor

Reviews:

Related manuals for GPS 18 - Deluxe USB Sensor

Brands by name

Popular brands