Garmin GPS 18 - Deluxe USB Sensor Help Manual Download Page 18

Page: 18 / 130

•

If you move the map, zoom in or out, or display a different area on the Graphic Map while the

Keep

Vessel Visible

and/or

Keep Next Maneuver Visible

buttons are selected, nRoute automatically deselects

those buttons so that you can manipulate the map as needed. After you have finished moving the map,
click the

Keep Vessel Visible

and/or

Keep Maneuver Visible

buttons again to re-activate. See Showing

the Vehicle on the Map for more information.

•

The Graphic Map can be oriented to display in either "North Up" or "Track Up" mode. See Changing Map
Orientation for more information.

•

You can change the color of the text and the background of the Graphic Map by setting your display
preferences.

•

You can show or hide the toolbars, InfoBar, Status Bar, and Information Tabs by right-clicking on any
toolbar and checking or unchecking the desired item.

For more information on the Graphic Map, see the following topics:

Setting Display Preferences

Moving the Graphic Map

Zooming In and Out on the Map

Showing the Vehicle on the Map

Changing Map Orientation

Using the InfoBar

Using the Status Tab

Using the Trip Computers Tab

Saving Your Data

Opening Saved Data

Legend: Businesses and Attractions

Legend: Points of Interest

Legend: Map Lines

Legend: Map Areas

Summary of Contents for GPS 18 - Deluxe USB Sensor



































































































































Search results

Summary of Contents for GPS 18 - Deluxe USB Sensor

Reviews:

Related manuals for GPS 18 - Deluxe USB Sensor

Brands by name

Popular brands

Garmin GPS 18 - Deluxe USB Sensor, Help Manual

Search results

Summary of Contents for GPS 18 - Deluxe USB Sensor

Reviews:

Related manuals for GPS 18 - Deluxe USB Sensor

Brands by name

Popular brands