8 When you finish the route, descend to the ground.
The rest timer starts automatically when you are on the
ground.
NOTE: If necessary, you can press LAP to finish the
route.
9 Select an option:
• To save a successful route, select Completed.
• To save an unsuccessful route, select Attempted.
• To delete the route, select Discard.
10 Enter the number of falls for the route.
11 When you are done resting, press LAP and begin your
next route.
12 Repeat this process for each route until your activity is
complete.
13 Press STOP.
14 Select Save.
Recording a Bouldering Activity
You can record routes during a bouldering activity. A route
is a climbing path along a boulder or small rock formation.
1 From the watch face, press START.
2 Select Bouldering.
3 Select a grading system.
NOTE: The next time you start a bouldering activity, the
watch uses this grading system. You can hold MENU,
select the activity settings, and select Grading System
to change the system.
4 Select the difficulty level for the route.
5 Press START to start the route timer.
6 Start your first route.
7 Press LAP to finish the route.
8 Select an option:
• To save a successful route, select Completed.
• To save an unsuccessful route, select Attempted.
• To delete the route, select Discard.
9 When you are done resting, press LAP to start your
next route.
10 Repeat this process for each route until your activity is
complete.
11 After your last route, press STOP to stop the route
timer.
12 Select Save.
Starting an Expedition
You can use the Expedition app to prolong the battery life
while recording a multi-day activity.
1 From the watch face, press START.
2 Select Expedition.
3 Press START to start the activity timer.
The device enters low power mode and collects GPS
track points once an hour. To maximize battery life, the
device turns off all sensors and accessories, including
the connection to your smartphone.
Recording a Track Point Manually
During an expedition, track points are recorded
automatically based on the selected recording interval.
You can manually record a track point at any time.
1 During an expedition, press START.
2 Select Add Point.
Viewing Track Points
1 During an expedition, press START.
2 Select View Points.
3 Select a track point from the list.
4 Select an option:
• To start navigating to the track point, select Go To.
• To view detailed information about the track point,
select Details.
Going Hunting
You can save locations relevant to your hunt and view
a map of saved locations. During a hunting activity, the
device uses a GNSS mode that conserves battery life.
1 From the watch face, press START.
2 Select Hunt.
3 Press START, and select Start Hunt.
4 Press START, and select an option:
• To navigate back to the starting point of your
activity, select Back to Start, and select an option.
• To save your current location, select Save Location.
• To view locations saved during this hunt activity,
select Hunt Locations.
• To view all previously saved locations, select Saved
Locations.
• To navigate to a destination, select Navigation, and
select an option.
5 After you complete your hunt, press STOP, and select
End Hunt.
Marine Activities
Sailing
Tack Assist
CAUTION
The watch uses GPS-based course over ground to
determine your course in the tack assist feature, and does
not account for other factors that can affect your boat's
14
Activities and Apps
