manualshive.com logo in svg

Garmin Cirrus Perspective SR20, Pilot'S Manual

The Garmin Cirrus Perspective SR20 is a cutting-edge aircraft equipped with advanced avionics. Ensure a seamless flying experience with the comprehensive Cockpit Reference Manual. Download it for free from our website, providing you with a wealth of valuable information for a secure and successful flight.

Share
Download
background image

190-00820-08  Rev. A

Cirrus Perspective

™

 by Garmin – Pilot’s Guide for the SR20/SR22/SR22T

2

SYSTEM OVERVIEW

SY

STEM

O

VER

VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID

ANCE

AFCS

ADDITIONAL FEA

TURES

APPENDICES

INDEX

1.1  LINE REPLACEABLE UNITS (LRU)

• 

GDU 1240A-30/1040A-30

 (1) – This unit is configured as a PFD that features a 12 or 10.4-inch LCD with 

1024 x 768 resolution.  The unit installed on the left/pilot side is designated as PFD.  This unit communicates 
with the GDU 1240A-20/1040A-20 (MFD), and with the on-side GIA 63W Integrated Avionics Unit through a 
High-Speed Data Bus (HSDB) connection.

• 

GDU 1240A-20/1040A-20

 (1) – This unit is configured as a MFD that features a 12 or 10.4-inch LCD with 1024 

x 768 resolution.  The unit installed on the right/copilot side is designated as MFD.  This unit communicates 
with the GDU 1240A-30/1040A-30 (PFD), and with the on-side GIA 63W Integrated Avionics Unit through a 
High-Speed Data Bus (HSDB) connection.

• 

GIA 63W

 (2) – The Integrated Avionics Units (IAU) function as the main communication hub, linking all LRUs 

with the PFD.  Each GIA 63W contains a GPS SBAS receiver, VHF COM/NAV/GS receivers, a flight director 
(FD; if GFC 700 is installed) and system integration microprocessors.  Each GIA 63W is paired with the on-side 
display via an HSDB connection.  The GIA 63Ws are not paired together and do not communicate with each 
other directly.

Summary of Contents for Cirrus Perspective SR20

















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Cirrus Perspective SR20

Garmin GPSMAP 400 series Pilot'S Manual preview
GPSMAP 400 series
Brand: Garmin Pages: 28
Garmin G1000H Cockpit Reference Manual preview
G1000H
Brand: Garmin Pages: 136
Garmin GMX 200 Pilot'S Manual preview
GMX 200
Brand: Garmin Pages: 16
Garmin Cirrus Perspective SR20 Cockpit Reference Manual preview
Cirrus Perspective SR20
Brand: Garmin Pages: 128
Garmin Approach G5 - GPS-Enabled Golf Handheld User Manual preview
Approach G5 - GPS-Enabled Golf Handheld
Brand: Garmin Pages: 168
Garmin APOLLO GX60 Quick Reference Manual preview
APOLLO GX60
Brand: Garmin Pages: 2
Garmin GI 275 Quick Reference Card preview
GI 275
Brand: Garmin Pages: 2
Garmin Cessna Caravan G1000 Pilot'S Manual preview
Cessna Caravan G1000
Brand: Garmin Pages: 482
I-Tech iAP-W2150 User Manual preview
iAP-W2150
Brand: I-Tech Pages: 31
ViewSonic VA2626wm - 26" LCD Monitor Specifications preview
VA2626wm - 26" LCD Monitor
Brand: ViewSonic Pages: 2
ViewSonic VP2772 Brochure & Specs preview
VP2772
Brand: ViewSonic Pages: 2
Garmin G1000:Socata Pilot'S Manual preview
G1000:Socata
Brand: Garmin Pages: 542
Ideal AKE Gastro O-53 User Manual preview
Gastro O-53
Brand: Ideal AKE Pages: 75
Omcan RS-CN-0350 Instruction Manual preview
RS-CN-0350
Brand: Omcan Pages: 24
Delfield 537-CR Specification Sheet preview
537-CR
Brand: Delfield Pages: 2
Garmin G3X Touch Quick Reference Manual preview
G3X Touch
Brand: Garmin Pages: 68
Hatco Glo-Ray GRHW-1SGD Series Installation And Operating Manual preview
Glo-Ray GRHW-1SGD Series
Brand: Hatco Pages: 16
Hatco Glo-Ray GRCD-1P Installation And Operating Manual preview
Glo-Ray GRCD-1P
Brand: Hatco Pages: 20

Brands by name

Popular brands

Load more brands