Garmin Cirrus Perspective SR20 Pilot'S Manual Download Page 123

Page: 123 / 656

190-00820-08 Rev. A

Cirrus Perspective

™

by Garmin – Pilot’s Guide for the SR20/SR22/SR22T

109

AUDIO PANEL AND CNS

STEM

VER
VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

OID
ANCE

AFCS

ADDITIONAL

FEA
TURES

APPENDICES

INDEX

MIC1

– Selects the #1 transmitter for transmitting. COM1 receive is simultaneously selected when this key

is pressed allowing received audio from the #1 COM receiver to be heard. COM2 receive can be added by

pressing the

COM2

Key. Selection of a second MIC button initiates Split-COM mode. When in Split-COM

mode, the pilot is using COM1, the copilot is using the COM2.

MIC2

– Selects the #2 transmitter for transmitting. COM2 receive is simultaneously selected when this key

is pressed allowing received audio from the #2 COM receiver to be heard. COM1 receive can be added by

pressing the

COM1

Key. Selection of a second MIC button initiates Split-COM mode. When in Split-COM

mode, the pilot is using COM1, the copilot is using the COM2.

PLAY

– Press once to play the latest recorded memory block. Press while audio is playing begins playing

the previously recorded memory block. Each subsequent press thereafter plays the previous block of

memory.

AUX

– When selected, audio from the ADF and DME (if equipped) can be heard.

PILOT

– Controls the pilot intercom system. Press and hold to toggle 3D Audio on/off for all headset

positions.

COPLT

– Controls the copilot intercom system. Press and hold to toggle copilot configuration between

crew and passenger.

PASS

– Controls the passenger intercom system. Press and hold to enable/disable passenger muting

during reception.

SPKR

– Selects and deselects the cabin speaker. COM, NAV, AUX, and MKR receiver audio can be heard

on the speaker. Press and hold for 2 seconds for Passenger Address (PA). The

SPKR

key flashes during

PA.

Cursor (CRSR) Control Knob

– Turn to move the cursor (flashing white or blue annunciator) to the

desired source.

Volume (VOL) Control Knob

– Turn the smaller knob to control volume or squelch of the selected source

(indicated by the flashing white or blue annunciator). When the volume control cursor is not active press

to switch to Blue-Select mode. If the volume control cursor is active, press twice (once to cancel the cursor,
twice to activate Blue-Select mode).

Summary of Contents for Cirrus Perspective SR20

















































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cirrus Perspective SR20

Reviews:

Related manuals for Cirrus Perspective SR20

Brands by name

Popular brands

Garmin Cirrus Perspective SR20, Pilot'S Manual

Search results

Summary of Contents for Cirrus Perspective SR20

Reviews:

Related manuals for Cirrus Perspective SR20

Brands by name

Popular brands